Navona 6m x 4m Freestanding Aluminium Louvered Pergola

Aluminium louvered roof pergolas are designed to utilize the natural fall of your existing surface for rain drainage, requiring a slight incline. It's essential to accurately measure the area and ensure a flat surface with a maximum 1:80 fall, as per building regulations. Any deviation from this may necessitate the use of packers to adjust the pergola legs. For optimal fitting of deluxe screens, a 10mm fall is recommended to ensure smooth operation. Note that packers or adjustments may be necessary if the fall exceeds this recommendation.

Pre-Installation Groundwork:

For optimal stability and peace of mind, it's crucial to securely mount your pergola onto a solid foundation. Beneath the finished surface, a stable substrate such as a concrete pad is essential for secure anchoring. Prior to our installation, it's imperative that all groundwork is adequate and, where necessary, completed. Please note that our installers are not authorized to perform groundwork tasks, so you may need to enlist the assistance of a local handyman for this preparation. This is your responsibility and we urge you to check all relevant groundwork requirements prior to ordering. We shall not be responsible nor liable for any required groundwork.

Concrete Pad: We highly recommend utilizing Blue Circle High Strength Postcrete spec 40N for the concrete pad. It's crucial to ensure that the pad's slope matches that of the designated surface for optimal stability.

Detailed Floorplans: Detailed floorplans for each pergola model are readily available on our website. These plans enable you to clearly identify the precise positioning of the pergola's footplates. Simply visit www.Bramblecrest.com and navigate to the product pages.

Selecting Pergola Size: Before initiating any groundwork, it's advisable to finalize your pergola size selection. However, if you've already laid the patio or deck, it's imperative to verify the robustness of the surface foundations. This is your sole responsibility.

Choice of Materials: Materials such as Type1, sand, cement, or concrete are inadequate unless they contain ballast, which is provided by Blue Circle Postcrete.

Installation on Composite Decking: When installing your pergola on composite decking without a solid base beneath, ensure there are structural beams aligned with the footplates for secure bolting. We recommend using postcrete pads of 400mm³ beneath tiles or decking, or structural joists under the decking, to enhance stability. It is the customers responsibility to ensure ground fixings are adequate.

Drilling and Fixing: Fixing bolts are supplied with the pergolas, or you can use 70-120mm steel bolts, or steel threaded bar set into the ground with quick cure polyester resin and diamond drill bits for porcelain tiles. Additional packing may occasionally be necessary to achieve correct levels.

Note on Porcelain Tiles: Exercises extreme caution when drilling porcelain tiles, please be aware that we cannot be held responsible for tile cracking due to surface laying or proximity to grout lines. If you agree to drilling and fixing into porcelain tiles, all works undertaken will be at your risk and you agree to waive any and all rights against us for any damage caused. Accordingly, we shall not be liable for any damage to porcelain tiles, unless caused by our negligence.

Electrical Installations: Our installation team is not trained in electrical work. Therefore, for any heater installations, please arrange for a qualified local electrician to perform the fitting. We shall not be responsible nor liable for any electrical or gas installations whatsoever.

Installation Note:

Please note, cover caps can not be fitted if Bramblecrest are installing the pergola with blinds. If you wish to have cover caps, the blinds will need to be installed by a 3rd party after the pergola has been fitted to the ground. Bolts caps will be supplied instead of cover caps if Bramblecrest installs the pergola and blinds.

Before our dedicated installation team arrives, it's crucial to ensure that you've completed and adhered to the following actions:

Location and Positioning: Decide the exact location and positioning of your pergola/item in advance. Ensure that the chosen location is suitable for the size and specifications of the pergola/item ordered. Refer back to the dimensions specified on your order for guidance.

Clear Access: Ensure clear and obstacle-free access to the installation site to facilitate smooth delivery and construction processes.

Ground Preparation: Ensure that the grounds where your pergola is to be constructed are level, solid, and free from any uneven bumps. Any necessary levelling or smoothing should be completed before our team's arrival. Additional works identified during this process may be subject to fees as outlined in our Assembly and Installation Service Terms and Disclaimer. Please consult the Ground Fixing Sheet for detailed instructions regarding surface fixing.

Discussion with Sales Team: Discuss all ground-related works with our sales team in advance to ensure that we are aware of the surface conditions you intend to construct on.

Availability During Installation: Ensure that someone is available to greet our team upon arrival and guide them to the installation site.

Liability Disclaimer: Understand that we do not accept responsibility for damages or faults to the pergola/items resulting from preventable causes not attributable to manufacturer faults. This includes factors such as natural ground movements, extreme weather conditions, tampering with the structure, or alterations to the surrounding area. [Note – this would also include wear and time over time and natural discolouration .]

Protection of Property: Understand that we will not be liable for any damage to your decking, patio, paving, garden, or general property resulting from the use of bolts, anchoring, or other materials necessary to secure the item. Refusal to secure the item properly, against advice, will be at the customer's sole risk.

Acknowledgment of Terms: By purchasing pergola/items, you agree to, acknowledge and understand the contents of this pre-installation checklist, as well as the Assembly and Installation Service Terms and Disclaimer, of which you will be deemed to have accepted upon purchase.

Our Pergola Installation service is conducted by a proficient two-man installation team. They will handle delivery, unpacking, construction at the agreed location, and removal of any packaging and waste from the construction site.

We reserve the right to apply additional charges at any time for assembly deemed complex or non-standard, such as construction over hot tubs or jacuzzis and on surfaces like porcelain.

To ensure the best working environment for our installation team, we kindly request that customers prepare the designated area adequately. This includes covering or relocating items like hot tubs, BBQs, kitchens, furniture, and other belongings. Please note that we shall not accept any responsibility or liability for any damage to these items if they are not appropriately covered or relocated. Additionally, we advise that all other contractors engaged by you with regards to any preparation or other work at the premises finish their work before our team's scheduled arrival to avoid any disruptions.